Menu
Current Environment
Efficiency Reconceived
The OmniHolder is the solution to eliminate clutter, material waste, decrease potential medical errors and infection transmission during patient care during surgery and ICU management.
A single platform to hold and secure safety-sensitive medical accessories improves set-up time by being readily available and preassembled, eliminating the need to gather multiple pieces when time is of the essence. The OmniHolder allows the invasive pressure transducers always to be calibrated at heart level, secures the breathing circuit, prevents manifolds central lines entanglement and pulling, and TEE probe dislodgements from the patient when the operating table moves.
A product that serves as a single integrated accessory to support and secure the multiple medical equipment used by the anesthesia and ICU staff when performing their functions, improving ergonomics , all while decreasing waste and costs.
One device to hold critical medical equipment such as breathing circuits, pressure transducers, manifolds and TEE handle. It provides a framework to keep pressure bags and lines organized in a central platform that can be placed on the front of the surgical or either side of ICU bed.
Designed to boost operating room efficiencies best practices improving turnaround times. When using multiple equipment during Anesthesia and ICU management, consolidation and order are essential to maximize efficiencies in surgery.
By reducing set-up time and keeping all key elements in a central platform, it improves the starting and packing-up process for patient transports.
The Omni Holder is modular in design providing various add-on options as the medical needs require: from a single arterial line to CVL and Swan Ganz catheter transducers, bilateral manifolds pockets and a TEE holder.
The device includes a height adjustable mechanism so pressure transducers can always be at the “patient’s heart level.”
This Modularity is in sink with the Modular Operating Room of the Future.
Lightweighting in the true sense. By eliminating multiple support gadgets from the setup, it simplifies the use into one accessory that offers more. It does more with less.
Going above and beyond the aorn.org standards for surgery and recovery in the post-anesthesia care unit (PACU).
It is a 3-in-1 product that replaces the Christmas tree holder, metal clamps and forks, and pressure transducers plates holder saving in operational cost budgets. More importantly, prevents capital equipment damage of the transesophageal echocardiogram probe by securing it near the patient’s head. Lastly, eliminates the chances of complications from mal calibration of pressure transducers.
With a versatile design, the OmniHolder adapts to the operating room, the hybrid procedure room and the ICU throughout the continuum of care.
OmniHolder Family Comparison
What does it mean to clinicians?
It reduces the set-up time of the multiple accessories. Easy to fold for storage, use and transport.
Safe to use by all medical personnel, it potentially decreases the chances of medical errors by keeping the pressure transducers always calibrated at the heart level, including in the ICU, with the dynamic self-adjusting mechanism.
Order and simplicity make operability safe and efficient.
Who can benefit from The OmniHolder-Quattro?
Important safety information
The OmniHolder was designed by practicing physicians with the “lightweighting” concept and safety from the aviation and space industry. It is indicated for all complex procedures that require invasive pressure monitoring, multiple drip lines, manifolds and other medical equipment.
It is ideal for cardiothoracic cases, structural hearts, transplants, complex oncology abdominal surgeries, neurosurgeries or any other surgical case that demands system organization in the operating room, transport and ICU management.
The modular pieces of The OmniHolder were designed and tested for use in the OR and ICU. Testing included stability of each component, strength, and performance. Do not use the platform or any accessories if damaged or defective.
The OmniHolder is made from medically graded injected plastic. Do NOT Autoclave. Heat sterilization will result in damage if done repeatedly. Avoid the use of any caustic substance to clean the product. It can be sprayed and wiped with any bactericidal, tuberculocidal, and virucidal containing chlorides and alcohol.
° When idle, fold the horizontal base into the vertical body of the OmniHolder and hang it from the surgical bed rail.
° When in use in the OR, follow these steps:
1. Unfold the base and insert it under the mattress.
2. Loop the pressure bag lines loosely on the hooks and then hang the bags over to prevent touching the floor. If the manual inflatable bulbs are reaching the floor, cross them.
3. Dock pressure transducers on brackets and lines on grommets.
4. Slide manifolds in pockets on the preferred side.
5. Add TEE ring holder as needed.
° When in use for TRANSPORT depending on hallways width, follow these steps:
1. Hang the pressure bags from the IV pole to prevent floor contact.
2. Slide manifolds out temporarily if necessary.
3. Fold the base to a vertical position.
4. Hang the OmniHolder from the side bedrail or lay flat on either head bedside.
° When in use in the ICU, follow these steps:
1. Secure the Omniholder self-balancing hook on ICU bed at the upper chest level.
2. Slide in manifolds on lateral pockets.
3. Loop the pressure bag lines loosely on the hooks and then hang the bags over to prevent touching the floor. If the manual inflatable bulbs are reaching the floor, cross them. If necessary, hang pressure bags from IV Pole to prevent floor contact.
© 2022-2032 ANGEL MEDICAL LLC